Utility makes it possible through  Ata- interface to read and "to stitch through" the microcircuit of flesh - PZU by means of dialogue  Actions->.Flash operations.
 
Designation of the knobs of the dialogue:
Read from HDD  reads flesh - PZU from the accumulator.
Write to HDD  "will be pierced" the microcircuit of flesh - PZU.  Remember that the microcircuit is stitched through to  45  seconds.  Do not turn off nourishment, until accumulator anew drives away disks!

Load from file  and  Save to file, correspondingly,  reads into the buffer and preserves from bufe of the Ra given in / from the file.
Recalc CRC  Is intended for the conversion of the check sum of flesh - PZU. This can prove useful, if you introduced what - that change in the regime of dump or with the aid of the external editors.
Dump  it makes it possible for you to look over the dump of contained PZU of those locating in the buffer of utility and to introduce into it what - or change.

Lower than the knobs is arranged window stake - VA of bytes in the buffer and the flag of correctness Comte the rolled sum.
Work with the official region
General information
The official region of accumulators  Seagate U8/.V8/.U10  contains the moduli, necessary for the work of accumulator in the user regime. The part of the moduli contains ispoln the yaemyy program code, podgruzhayemyy in OZU for the fulfillment  as needed in the work. Another part contains tuning accumulator and identification info to rmatsiyu.  Access to the official moduli necessary in the work is effected through inte of rfeys  ATA  by means of dialogue  P -.operations.
In the official zone so are contained the ravine of the plant testing of accumulator, interface inaccessible  through Ata-. But since the work of accumulator it does not influence, then the developers of user microprogram did not attend to by the possibility of its reading che cut  Ata- interface. So it should be noted that a change (record) in the part of the moduli blocks ruyet accumulator itself, to avoid their spoiling.
T k. postavl the yaemaya from the plant microprogram of accumulator  Seagate U8/.V8/.U10  is designed only for the work of disk in the user regime, then in it are not provided the methods of restoring the accumulator through  Ata- interface with the loss of some overlay moduli.  We imperatively recommend not to copy moduli  Seagate U8/.V8/.U10  by the moduli of another accumulator of these models without the emergency!
Each disk modulus is stored in the official region of disk in several cut rvnykh copies –from  2  to  1 2  copies to one physical pove rkhnost', depending  on the criticality of the loss  of this modulus .