For the part of the moduli is provided the presence in title of signature (for example,  SYS1, SYS2, OACT)  and check sum of modulus. Accumulator, checks these parameters during an attempt  at the record of modulus  and with their tactlessness simply he will not write down modulus; however, it will not report error.
Therefore:
5) in the utility is provided the automatic conversion of the check sum (for those moduli, by which this it is necessary) during an attempt at their record;
6) after the record of modulus should be it considered conversely, in order to verify was accepted accumulator your changes.
Work with the moduli of the accumulator
For the access to the moduli of official region select the point of menu  Service - > CP Operations.  The dialogue of work with the configurative pages is in detail described in the general management on complex  HRT.
One should especially accurately relate to the moduli with signature  SYS1  and  SYS2, since these moduli contain the most important adaptive tuning of accumulator, introduced there during the plant testing  . With their loss the accumulator can ispor of tit's of 4 bezvozv military!
Work defect - by sheet  the general information
Dialogue defect - sheet has the following points:
P+.g-.list – reflects the mixed defect - sheet  (P -.list  and  G -.list  simultaneously)  P -.list – plant defect - sheet.
G -.list – the sheet of the acquired defects. The defects, discovered in the process of operating the accumulator, are placed in it.
Track – track defect - sheet. In it is reflected the table of the track defects  CP14,  sostavl yaemaya during plant samotestirovaniya of accumulator. After the end of plant tests, all records from  CP14  (at the plant) are converted into the group of the sectorial defects, which close defective track from the first on the latter sector.  Therefore, for accumulators  Seagate U8/.V8/.U10  the table of track defects does not have a sense, since it is not used in the run of job.  Window is left in the utility for the compatability with other accumulators.
Logical – window for adding the defects in the logical coordinates.  You can either introduce the defects through this dialogue or import them from the file, sfor mi rovannogo by any program of testing logical surface. Then it is necessary to cause by the right knob of the mouse of menu defect - sheet and to harvest point  "Upload".  Defects will fall in  P -.list.
One should remember that after the addition of defects into  P -.list  it is necessary to produce formatting surface.
 
Special features defect - sheet of accumulators  Seagate U8/.V8/.U10
The defect - the sheet of accumulators Seagate U8/.V8/.U10  should be carried  to the special features:  8)  any, even track, defects hide themselves as sectorial.

9) the placement of defects in the utility is possible only by way of the indication of their logical coordinates;