Debugging
In the process of work the utility, for the technological reasons, produces automatic changes in some parameters of accumulator. Therefore the interruption of the standard work of complex leads to all possible problems in the work as that:
? the impossibility of passport change, its discharge to the values on - to silence;
? hanging up upon the concealment of defects;
? the impossibility of access to  Smart- to monitoring;
? the incorrect determination of the logical parameters.

The most characteristic feature of the malfunction of the subsequent in view of nekor rektnoy work with the complex is the incorrect determination of the parameters of logical sect ditch: instead of standard value of  63  ravine sektora in the window of accumulator will be present another number. In this case one should act on the following algorithm:
6. To perezagruzit' the accumulator through point  Reset->.Super,  or by the disconnection of nourishment;
7. To remove from the accumulator the possible password through point  Actions - > Unlock;
8. To throw out the values of paspor that to the plant installations by point  Service->.Special Area->.Restore Passport;
9. To perezagruzit' the accumulator through point  Reset->.Super,  or by the disconnection of nourishment;
10. To shut and to anew open the window of utility.
During the random premature interruption of the procedure of the concealment of defects the fulfillment of this algorithm is compulsory!