Example of the size of the name:  %.l_.fcode _ %.f_.SN%.n

File SConner..INI
Section  [ MODELS ]  determines the rules of the reference of concrete models to the families. Selection goes on the version of the micro-code. In the standard delivery, all known to the authors versions refer in  one and the same section  [ U8 ].  If you want to make more detailed division into the families with the more fine adjustment the separation must be produced precisely at this level.
Section  [ LOGICAL ]  contains the reference book of the standard models of accumulators. It is possible to supplement independently it, adding the names and the logical parameters of necessary models.
Section  [ GENERAL ]  can contain the base tuning of utility, necessary for the normal operation with accumulators  Seagate U8/.V8/.U10.

Section  [ CP LIST ]  contains parameter  max CP,  which determines the number of maximum modulus which will be preserved in the file of resources. The standard value of this key for  Seagate U8  is such:
Max CP=222

Nominal sections –this of the section of the description of families. The names of the sections must coincide with those, which are assigned in the section  [ MODELS ].

In any of the nominal sections the following keys are possible:

CP TimeOut  Is determined the maximum waiting time of the readiness of accumulator during reading  CP  in milisekundakh.

CP LIST  Is determined the enumeration of the moduli of official region, which are subject to readout. The fact is that the turning to certain of the moduli, causes the "hovering" of nakopitel 4 and is necessary to exclude them from the work.
For the savings of place, can be assigned both the concrete moduli and ranges. Thus, naprime r, record  by 1,2,3,4  indicates: "to place in the list moduli with numbers  1, 2, 3  and  4",  but record  by 1-4  indicates the same. But record  by 1-4,10-20  indicates "to place in the list moduli with the numbers from  1  to  4,  and also from  10  to  20  inclusively".

The standard value of this key for  Seagate U8/.V8/.U10  is such:  CP LIST = 0-24,221
Electronics
General information
Accumulators  Seagate U8, Seagate V8  and  Seagate U10  are distinguished by pays of elektroni - Ci.
The pays of accumulators  Seagate U8  and  U10  are distinguished between themselves extremely insignificantly and they can be interchanged. Moreover, are noted the cases of entering from the plant of accumulators  U10,  on which were established the pays of older sample –from  Seagate U8. Pr and the replacement of pay  U10  to the pay from  U8  should be only altered the microprogram of nakopitel 4 into flesh - PZU.
The pay of accumulator  Seagate V8  differs from accumulators  Seagate U8/10  in terms of the microcircuit of servodekodera: on accumulators  U8/.U10  is established servodekoder of production  ST,  while on  V8 – production  NEC.  In view of this pays  V8  and  U8/.U10  are incompatible between themselves.