For Seagate Drives Ux
Detailed description of accumulators
The authors warn that the use of a utility "HDD Repair Tool for Seagate Ux " is permissible ONLY with accumulators Seagate Ux. An attempt at the application of a utility on the accumulators of other models can lead to their irreversible spoiling!
BEFORE beginning the repair of accumulator, immediately after the start of utility, against yazatel'no it is necessary to preserve in the archive its disk moduli. In the presence of external sequential PZU –to preserve its contents.
? sequential PZU it is possible to count by means of dialogue Actions->.Flash operations;
? disk moduli it is possible to consider posr yedstvom of dialogue Service - > CP operations.
Look the detailed description of work with these dialogues in the appropriate divisions of documentation.
With the pushing of the right knob of "mouse", the program issues on the screen the main menu, the hierarchy of points of which is given below:
The designation of the points of menu will be described below.
Testing the accumulator
Upon the entering of accumulator in the repair should be verified by tester the resistance between the common wire and the power buses of +.shchV and +.y2V:
? on the power bus of +.y2V resistance must be about 70 kљ;
? on the power bus of +.shchV resistance must be about 2 kљ.
We further connect accumulator to pay HRT and start utility. Accumulator nekoto cluster by delay must leave into the readiness - in the field of the "window of light-emitting diodes" must ostat's 4 "burn" only flags DRDY and DSC.
The work of utility with the accumulators, which do not emerge into the readiness on Ata- to interface, is impossible! This is caused by the limitations of the microprogram of the very of nakopitel 4.
After the start of utility will appear the window, in which will be represented kha rakteristiki of accumulator.
Focus attention, that the complete name of the microprogram of accumulator, printed out in field Family code, contains 15 numbers, grouped into 2 groups of 3 yekh and 4 yekh fields respectively. The first group –the version of overlay part, the second group - version of contained PZU. However, gluing on the housing of accumulator contains only the first two fields of the version of contained PZU in the line "Firmware".
Special features of testing accumulators Seagate Ux
Unfortunately, all accumulators Seagate U for a series do not permit implementation of access through Ata- interface to the surface of disk directly in the physical coordinates. Because of this, in the utilities the testing is led via access to surface only along the logical coordinates of the sectors, p reobrazovaniye of which into the physical coordinates achieves accumulator itself.
上一篇：HRT的Seagate Drives U6英文说明书